Table of Contents
Advertisement
Back to Contents Page
Palm Rest
Dell Inspiron™ 6000 Service Manual
Removing the Palm Rest
Replacing the Palm Rest
Removing the Palm Rest
CAUTION:
Before you perform the following procedures, see the safety instructions in the Product Information Guide.
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
as the back panel) on the computer.
NOTICE:
To avoid damaging the system board, you must remove the main battery before you begin working inside the computer.
1. Follow the instructions in
"Preparing to Work Inside the
2. Remove the
Mini PCI card
(if applicable) and the
3. Remove the
hard
drive.
4. Remove the
hinge
cover.
5. Remove the keyboard.
6. Remove the
display
assembly.
7. Turn the computer over and remove the thirteen M2.5 x 8-mm screws from the computer base.
1 M2.5 x 8-mm screws (13)
8. Turn the computer top-side up and remove the M2.5 x 5-mm screw and loosen the captive screw from the palm rest.
Computer."
optical
drive.
Advertisement
Table of Contents
