Kenmore 116.33922 Owner's Manual page 10

TO STORE ATTACHMENTS
Remove dusting brush or combination
brush. Snap into appropriate storage location.
Remove crevice toot from the wand by twist-
ing. Lay aside.
Remove the extension wand from the hose.
Twist the wand to the left and pull from the
hose end.
Upper
Wand
Unlock the wand by turning the wand lock-
ing ring to the UNLOCK position.
Slide the lower wand into the upper wand.
Turn the wand locking ring to the LOCK
position.
Place the crevice tool down into the com-
pressed wand. Snap into the appropriate
storage location. \,
Reinsert the hose fully into the opening on
the lower body from which it was removed.
Press firmly to assure connection.
CAUTION
DO NOT pull the vacuum cleaner
around the room by the hose. Property
damage could result.
EXTENSION HOSE
SOME MODELS
Some models include an extra hose which
connects to the stretch hose on the vacuum
for a longer cleaning reach.
_onus
Release
Electrical
Connec_on
-Extension
Hose
Connect bonus hose to extension hose by
pressing together. Make sure electrical
connections are pressed firmly together.
To disconnect press release button on
hose and pull apart.
When using the regular hose or with
the extension hose attached, the
cleaner should be on a solid surface
on the same level or below the level of
the user'sfeet. DO NOT use the hoses
when the cleaner is above the level of
the user'sfeet.
POWER-MATE JR.®
When attaching Power-Mate Jr.® to
extension hose press together and align
electrical connections.
Power-Mate Jr.®
_- _ Electrical
Connectors
To disconnect press release button on
hose and pull apart.
CAUTION
!
rf., CAUTION
DO NOT leave the Power-Mate Jr.®
running in one spot for any length of
time. Damage to carpet may occur.
10