Download Print this page

Kenmore Sears 95629 Use And Care And Safety Manual page 16

Advertisement

REMOVABLE
OVEN RACKS
Be careful
not to scratch
the
oven finish
when
instagRing
or removing
ore.
racks.
To instaih
1. Set the raised back edge of the rack on a pair of rack
guides.
2. Push the rack in until you reach the bump in the rack
guide, then lift the front of the rack and push the rack
all the way In.
To remove="
1. Pull the oven rack out, then up.
Some models have one standard oven rack and one
folding oven rack.
The folding
rack can be easily stored away when not in
use.
NOTE: For best pe_ormance,
remove
oven racks
during
a clean
cycle.
If oven yacks
are le_t in the
range
during
a self-clean
cycle,
they
v_ill darken,
lose theiF luster
and become
hard to slide°
If you
choose
to leave
the
racks
8n the
oven,
you can
polish the edges of the racks
with steel
woot and
apply a small amunt
of vegetabge
oil to the rack
edges
after
the
self.clean
cycle.
BUMP
IN RACK
GUIDE
F
REMOVABLE
OVEN DOOR
TO _'emove:
1. Open the door to the stop position (see Ulustratlon).
2. Grasp the door at each slde and lift up and off the
hinges.
NOTE:
When
the
door
is
removed
and
hinge
arms are at stop position,
do not bump or
t_ to remove
the hinge
arms.
The hinges
could snap back
causing
an injury
to the
hands
or damage
to the porcelain
on the
front
of the range.
Cover the hinges with
toweling
or
empty
towel
roils
while
working
in the
oven area.
To replace:
1.
Hold the door over the hinges with the slots at the
bottom edge of the door lined up with the hinges.
The
hinge
arms
must
stilll be in the
stop
position,
2.
Slide the door down onto the hinges as far as it will
go and close the door.
STOP (BROIL) POSITION
HINGE
REMOVAIBLE
STORAGE
DRAWER
This drawer
gives
you space
for
keeping
cook-
ware
and
bakeware.
PlasUcs
and
fiamrrmble
material
should
not
be kept
in this drawer.
Do not overload the storage drawer. If the drawer is too
heavy, it may sllp off the track when opened. To open the
drawer, grasp the center of the handle and pull stralght
out.
To remove:
Pull drawer straight
out and lift over the
guide stops.
To replace:
Lift
over the guide stops
and slide
drawer Into place,
STOP
15
NCMNT01

Advertisement

loading

This manual is also suitable for:

95629