4
Removal and replacement
procedures preliminary
requirements
CAUTION:
provider. Accessing these parts can damage the computer or void the warranty.
Tools required
You will need the following tools to complete the removal and replacement procedures:
●
Flat-bladed screw driver
●
Magnetic screw driver
●
Phillips P00 screw driver
●
Torx T-4 screw driver
Service considerations
The following sections include some of the considerations that you must keep in mind during
disassembly and assembly procedures.
NOTE:
As you remove each subassembly from the tablet, place the subassembly (and all
accompanying screws) away from the work area to prevent damage.
Plastic parts
CAUTION:
care when handling the plastic parts. Apply pressure only at the points designated in the maintenance
instructions.
Components described in this chapter should only be accessed by an authorized service
Using excessive force during disassembly and reassembly can damage plastic parts. Use
Tools required
9