Table of Contents
Advertisement
Battery
Description
3.70-V, 3850-mAh, Li-ion battery (includes cable)
Before removing the battery, follow these steps:
1.
Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on,
and then shut it down through the operating system.
2.
Disconnect the power from the tablet by unplugging the power cord from the tablet.
3.
Disconnect all external devices from the tablet.
4.
Remove the rear cover (see
WARNING!
replacement battery provided by HP, or a compatible battery purchased from HP.
CAUTION:
information. To prevent loss of information, save your work or shut down the tablet through Windows
before removing the battery.
Remove the battery:
1.
Disconnect the battery cable (1) from the system board.
2.
Release the shielding tape (2) from the battery.
3.
Remove the four Phillips PM1.75×4.0 screws (3) and the Phillips PM1.75×3.0 screw (4) that
secure the battery to the tablet.
16
Chapter 4 Removal and replacement procedures preliminary requirements
Rear cover on page
To reduce potential safety issues, use only the battery provided with the tablet, a
Removing a battery that is the sole power source for the tablet can cause loss of
14).
Spare part number
724536-001
Advertisement
Table of Contents
