Logging In And Out - ADDER AdderView Matrix User Manual

To select a computer using mouse buttons – Advanced method
1 Select the on-screen menu by pressing the middle and right buttons of a
three button mouse.
2 Use the scroll wheel to highlight the required computer port.
3 Then, select either:
• Shared Use - press the left mouse button - This standard method allows
other users to view the same computer port. Control of the port is
given to one user at a time, on a first-come, first-served basis and is
relinquished after a certain period of inactivity.
• Exclusive Use - press and the left mouse button – This mode
prevents any other user from viewing or controlling the computer
port until you either select another computer or log off. This mode
should be used with care – it can also be blocked as an option by the
administrator.
• Video Only - press and the left mouse button – This mode displays
the video picture of the port, but prevents keyboard or mouse activity
from controlling the computer.
• Escape without selecting a port – press the right mouse button.

Logging in and out

The AdderView Matrix features a straightforward security system that helps to
prevent unauthorised access to some, or all connected computers.
Note: If an AdderLink IP is fitted and you are a remote IP user, then a separate IP
login and password are required in addition to (and in advance of) these details
Logging in and out
– see for more details.
If the security option has been selected by your administrator then you will be
asked to enter a User Name and Password when you first access a user port.
When you have finished using the computer, it is then good practice to logout,
forcing any other users to authenticate themselves prior to use.
Note: If the security option has not been enabled then no login is required.
To log in to the AdderView Matrix
1 If it is not already displayed, move the mouse or press any key to display the
log in screen.
ADDERVIEW MATRIX
User Name:
Password:
Port 1 login Esc-Scr Save
2 Enter your designated User Name and press
3 Enter your designated Password and press
then the selected port will be displayed.
Note: If either the User Name or Password are incorrect, the entries will be
cleared to allow another attempt.
To log out from the AdderView Matrix
1 Select the on-screen menu in one of three ways:
• By simultaneously pressing and then releasing
Note: The and hotkeys may have been changed. If the
combination fails to work, then please contact the system administrator
for details.
• By pressing the middle and right buttons of a three button mouse, or
• By selecting port using the front panel buttons
2 Press . The login window will be displayed.
Alternatively:
• Press and at any time to log out.
.
. If both entries are correct
.
33