Panasonic KX-TD816 User Manual page 90

User Programming
Programming
Display PT
0 1 7
Dial 017.
<PT Display>
017 USER CODES
Repeat these steps
DISA user code
Enter a DISA user
code (Blank or 4-10
digits).
To delete the current entry, press CLEAR.
To change the current entry, press CLEAR
and enter the new name.
<To end:>
END
Press END.
Conditions
• This setting is required if Trunk (Outside line) Security mode is selected in program [809]
DISA Security Type.
• Each code should be unique and composed of four through ten numerical digits, 0 through
9.
User Manual References
4.3.36 Direct Inward System Access (DISA)
90
NEXT
Press NEXT.
<PT Display>
User Code NO?→
COS no.
Press →.
Enter COS Press STORE.
number (1-8).
Enter a DISA user code number (01-32).
To enter user code number 01, you
can also press NEXT.
<PT Display Example>
01:
<To continue:> [When SELECT is pressed]
STORE NEXT
PREV
SELECT
Press NEXT or
PREV or SELECT.
DISA user code no.
C:8
DISA user code no.
Enter the desired
DISA user code number.
User Manual