Confirming the assigned data on the Flexible button
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
PT
Press the desired Flexible
(CO,DSS,PF) button.
The display shows the current status.
— To exit Station Programming mode: Press [PROGRAM] or lift the handset.
— If you wish to change the data, follow the programming procedure explained in this section.
Clearing the data on the Flexible button
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
PT
Press the desired Flexible
(CO, DSS, PF) button that
you wish to clear.
— To exit Station Programming mode: Press [PROGRAM] or lift the handset.
— The lists on the following pages are the buttons and programming access numbers used for
Station Programming. Detailed operating instructions are explained on each page in this
section.
User Manual
HOLD
Press HOLD (END).
The display shows the initial programming mode.
AUTO DIAL
2
STORE
Dial 2.
Press STORE.
The STORE indicator lights.
The display shows the initial programming mode.
Station Programming
47