Panasonic KX-TD816 User Manual page 65

OR
1)
Press 2 and then rotate the Jog Dial until "M"appears.
2)
Press 2 and then rotate the Jog Dial until "i"appears.
3)
Press 2 and then rotate the Jog Dial until "k"appears.
4)
Press 2 and then rotate the Jog Dial until "e"appears.
Note
• Pressing the SHIFT button alternates between capital and lower case letters. Once this
button is pressed, that letter SHIFT mode remains until SHIFT is pressed again.
• To erase the last word (to backspace), press the CONF button.
(The CONF button becomes the " "(backspace) key when using the overlay.)
• To erase all of the data, press the CLR (S2) button.
• If you keep rotating the Jog Dial, all of the characters will be displayed in order.
<Example> If you rotate the Jog Dial after pressing 2, all of the characters will appear
in the following order:
A a B b ... Z z (space) ! ? . , ' : ;
Conditions
• The default is "Not Stored".
• Up to 10 dialing numbers and names can be assigned. Each dialing number has a maximum
of 16 digits and each name has a maximum of 10 characters.
User Manual
/ + – = < > # $ % & @ ( ) A a B b ...
Station Programming
65