Panasonic KX-TD816 User Manual page 84

User Programming
Programming
Display PT
0 0
Dial 003.
<PT Display>
003 EXT NUMBER
Repeat these steps
extension no.
Enter the extension no.
To delete the current entry, press CLEAR.
To change the current entry, press CLEAR
and enter the new name.
<To end:>
END
Press END.
Conditions
• There is a maximum of 32 extension numbers for KX-TD816, and 128 extension numbers
for KX-TD1232. Each extension number can be two, three, or four digits, consisting of 0
through 9. The
• For the KX-TD1232, jack numbers 01 through 32 are for the Master System and 33 through
64 are for the Slave, if available.
• An extension number is invalid if the first or second digits do not match with the program
[100] "Flexible Numbering, (01)-(16) 1st through 16th hundred extension blocks" setting.
84
NEXT
3
Press NEXT.
<PT Display>
Jack NO?→
STORE
Press STORE.
and # keys cannot be used.
jack no.
Enter a jack number.
To enter jack number 01, you can
also press NEXT.
To select the second part (-2), press
NEXT after entering the jack number.
<PT Display Example>
#01-1:EXT101
<To continue:> [When SELECT is pressed]
NEXT
PREV
SELECT
Press NEXT or
PREV or SELECT.
jack no.
Enter the desired
jack number.
User Manual