Panasonic KX-TD816 User Manual page 46

Station Programming
Confirming the assigned function data
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
PT
program access number
Enter the program access number.
Enter the program access number* as follows.
- 1:Preferred Line Assignment - Outgoing
- 2:Preferred Line Assignment - Incoming
- 3:Full One-Touch Dialing Assignment
- 4:Intercom Alert Assignment
- 5:Call Waiting Tone Type Assignment
- 6:Self-Extension Number Confirmation
- 7:Live Call Screening Mode Set
-81:Initial Display Selection
-82:Bilingual Display Selection
- 9 :Handset/Headset Selection
-01:Remote Station Look Control (- Operator / Manager only)
-02:Call Log Lock Control, Incoming (- Operator / Manager only)
-03:Live Call Screening Password Control (- Operator / Manager only)
- #:Station Programming Data Default Set
The display shows the programmed data.
<PT Display Example>
When you press [5], the display shows:
C.W. Tone1
* A programming access number is required to program/confirm the function data by Station Programming.
† : Available when the Digital Super Hybrid System is connected to a Digital Proprietary Telephone capable Panasonic
Voice Processing System (one that supports digital proprietary telephone integration; e.g., KX-TVS100)
— To exit the Station Programming mode: Press [PROGRAM] or lift the handset.
— If you wish to change the data, follow the programming procedure explained in this section.
46
HOLD
Press HOLD (END).
The display shows the initial programming mode.
†
†
(- The Call Waiting tone is currently programmed to Tone 1.)
User Manual