Checking the time setting
Display PT
Lift the handset or press
SP-PHONE.
<PT Display Example>
If "10:10" has been set, the display shows;
Alarm 10:10AM
Alarm 10:10AM*
Conditions
• The system clock must be set correctly beforehand.
• There is no limit to the number of the extensions who can set the Timed Reminder at the
same time.
• Only the latest time setting is valid at the extension whether it was set by the extension user
(Timed Reminder) or by the Manager extension or an Operator (Timed Reminder, Remote).
• Station Message Detail Recording (SMDR)
SMDR automatically records the detailed Timed Reminder information (date, time,
extension number, start/no answer). It is programmable to be printed out when the Timed
Reminder starts and the alarm is not answered. Refer to "Station Message Detail Recording
(SMDR)" in the Features Guide for further information.
Programming Guide References
[000] Date and Time Set
[217] Timed Reminder Alarm Ring Time
[990] System Additional Information
User Manual References
4.3.81 Timed Reminder
User Manual
7
2
Dial 7 2.
only one time
–
or
daily
–
Station Features and Operation (DPT/SLT)
(DSS)
or
extension no.
Dial the desired extension
number or press DSS on
which you have set
the Timed Reminder.
If time setting is not stored.
Alarm Not Stored
Hang up or press
SP-PHONE.
311