Panasonic KX-TD816 User Manual page 374

APPENDIX
English Display
Loop-CO
Message Waiting
NIGNT
Not Stored
Pref.In :CO-02
Pref.In :NO
Pref.In :Ring
Pref.Out:CO-02
Pref.Out:ICM
Pref.Out:Idle
Pref.Out:No
Save
Tone Call
Tone Type-2
TRK GRP-3
VTR-101
Voice Call
092-555-2111
Conditions
• If the displayed characters exceed sixteen digits, "&" is shown at the right-hand edge.
• The duration time display is only shown when you make or receive an outside call. Count
start time for outgoing calls can be programmed as desired.
• When you confirm key programming, be sure to press a button while on-hook. If the "Full
One-Touch Dialing" feature is set, dialing mode will start when pressing PF (Programmable
Feature), DSS (Direct Station Selection), SAVE or REDIAL button.
374
French Display
BOUCLE DE LR
MESS. EN ATTENTE
NUIT
NON MEMORISE
ENT.PREF:LR-02
ENT.PREF:NON
ENT.PREF:SONN
SOR.PREF:LR-02
SOR.PREF:INTCM
SOR.PREF:LIB.
SOR.PREF:NON
SAUVEGARDE
APPEL-TON.
TON. TYPE-2
GR LR-3
TMV-101
APPEL VOCAL
092-555-2111
Description
Loop-CO (L-CO) button is assigned.
Message Waiting (MESSAGE) button is
assigned.
Night button is assigned.
No programming is assigned.
Select "Prime Line (Outside Line) Preference
— Incoming".
Select "No Line Preference — Incoming".
Select "Ring Line Preference — Incoming".
Select "Prime Line (Outside Line) Preference
— Outgoing".
Select "Prime Line (INTERCOM) Preference
— Outgoing".
Select "Idle Line Preference — Outgoing".
Select "No Line Preference — Outgoing".
SAVE button is assigned.
Select Ring-Calling mode.
Select ringing tone for a CO button or
intercom calls.
Group-CO (G-CO) button is assigned.
Voice Mail (VM) Transfer button is assigned.
Select Voice-Calling mode.
One-Touch Dialing button is assigned.
User Manual