Baumatic BHS600.5-SS Instruction Manual page 16

o Place a bracket onto each corner, ensuring that the outer hole
lines up with the hole on the corner of the hob.
o Fasten the bracket to the corner of the hob with a screw.
o Place the long screw into the fixing ho
bracket but do not fully tighten.
o Carefully turn the hob back over and then gently lower it into the
aperture hole that you hav
o When the hob is correctly positioned, tighten the long screws to
fix the hob securely in the aperture hole. These screws MUST
be securely tightened.
o IMPORTANT:
holes around the outside of the hob.
YOU MUST ens
not blocked by the work top, when you
put the hob into position (see drawing
opposite).
o Carefully turn the hob upside down
place it on a cush
o The supplied brackets need to be fitted to
each of the four corners on the underside of
the hob.
e cut out.
There are ventilation
ure that these holes are
ioned mat.
le on the outer edge of the
and
16