Table of Contents
Advertisement
Position ng
i
The adjacent furniture must be able to withstand a
minimum
ambient temperature of the room it is located in,
during periods of use.
This appliance is classified as Class 3 and therefore is to be built into a
kitchen unit (
depending on size) or 600 mm worktop that is at least 30
m
m thick. The following minimum clearance distances must be
observed:-
o 700 mm between the hob surface and the underside of any
horizontal surface above it.
o 50 mm clearance around the sides and front of the appliance.
o 50 mm clearance between the back of the hob surface and the
wall behind it, measured from the cut-out.
o If the hob is positioned so that the right or left hand side of the
appliance will be near to the edge o
be a gap of at least 150 mm between the side of the hob and the
vertical surface of the
Unpacking the appliance
W
hen unpacking the appliance please check that the following items
are contained wit
hin the packaging:
1 Baumatic hob
1 Installation an
d instruction manual
1 Guarantee card
4 Fixing screws
4
fixing brackets
1
Sealing strip
temperatur
e
rise
kitchen unit.
of
100°C
above
f a kitchen unit. There must
the
14
Advertisement
Table of Contents
