Advertisement
Managing IP Phones
Model
ADTRAN branded and
equivalent Polycom branded
SoundStation IP 5000, 6000,
and 7000.
Connecting to the GUI
1. Connect to the NetVanta 7000 Series GUI by opening a new page in your Internet browser and entering
the unit's IP address in the address field in the following form: http://<ip address>/admin, for example:
2. At the prompt, enter your user name and password and select OK.
The default user name is admin, and the default password is password.
Adding New Phones
New phones can be added to the system using one of the following methods:
•
Configuring from the NetVanta UC Installation Wizard on page 3
•
CSV Import (IP Phone Configs Menu) on page 5
•
Manual Input (IP Phone Configs Menu) on page 7
•
Configuring from Installation Mode on page 9
Unless the phone is used as a hot desk phone, you will also need to create a user account to associate with
the phone. For more information about user accounts, refer to
7000
Series. For more information about hot desking, refer to
documents are available on ADTRAN's Support Community at https://supportforums.adtran.com.
Configuring from the NetVanta UC Installation Wizard
The NetVanta Unified Communications (UC) Installation Wizard steps you through the initial
configuration of the NetVanta 7000 Series product. In the phone and user configuration portion of the
wizard, you will have the option to enter phone and user information either manually or by importing a
comma separated value (CSV) file.
6AOSUG0002-1A
Table 1. Release R10.8 Phone Compatibility
Part #
Multiple
Yes. There are no restrictions when using these models.
Copyright © 2013 ADTRAN, Inc.
Compatibility with AOS Release R10.8 and Later
Configuring User Accounts on the NetVanta
Configuring Hot Desking in
Connecting to the GUI
AOS. Both
3
Advertisement
