Advanced Functions; Stereo Expander - Auxiliary Amplifier Set-Up - Fender Cyber-Deluxe DSP 7 Operating Instructions Manual

Advanced Functions

24
✧
✧
3 Advanced Functions
3 Advanced Functions
Figure 3a
Stereo Expander Connection
% Most, or all panel controls on an
auxiliary amplifier are
bypassed when connecting directly
to the power amp input.
Figure 3b
Stereo Amp Positioning
% Separate
the amplifiers
balance their loudness levels for a
full stereo effect.
w w w w w w . . f f e e n n d d e
This section discusses system configuration options and the MIDI features
of the Cyber-Deluxe™ amplifier.
Stereo Expander – Auxiliary Amplifier Set-Up
Fully experience the stereo effects onboard the Cyber–Deluxe™ amplifier
using the Stereo Expander feature. Any second guitar amp, such as a
Fender ® Princeton
1) Switch POWER OFF to both amplifiers.
2) Turn the EXPANDER LEVEL knob {OO} fully counterclockwise.
3) Connect the amplifiers, EXPANDER jack {QQ} to the auxiliary amp's
POWER AMP IN or EFFECTS RETURN jack, using a guitar/patch cord
(tip–sleeve (TS) and tip–ring–sleeve (TRS) type cords are acceptable).
usually
4) Set the EXPANDER MONO/STEREO button {RR} to the IN position.
5) Switch POWER ON to the Cyber–Deluxe™ amplifier, then the auxiliary amp.
6) While playing with your guitar and Cyber–Deluxe™ amplifier at normal
levels, turn the EXPANDER LEVEL knob {OO} until the amplifiers are
equally loud.
necessary to adjust them to achieve a balance in volume and tone.
"Auxiliary"
and
Amplifier
7) Toggle the EXPANDER PHASE {PP} switch IN and OUT to determine if
either setting improves the stereo effect. This feature corrects the phase
differences that could exist between various amplifier models.
✧
e r r . . c c o o m m
® 65 amplifier, can be used, see Figures 3a and 3b below.
If any auxiliary amp controls are functional, it may be
w w w w w w . . m m r r g g e
Cyber–Deluxe
Amplifier
e a a r r h h e e a a d d . . n
™
n e e t t