Expander Jack And Controls; Effects Loop Jacks And Switch - Fender Cyber-Deluxe DSP 7 Operating Instructions Manual

w w w w w w . . f f e e n n d d e
OO. EXPANDER LEVEL
Balances the signal level sent to an external guitar amplifier connected to
the EXPANDER jack {QQ}, to compensate for differences in apparent
volume output.
PP. EXPANDER PHASE SWITCH
Reverses the phase of the signal at the EXPANDER jack {QQ}, which could
improve the overall sound when the expander function is used with certain
other guitar amplifiers. Select the switch position that sounds the best.
QQ. EXPANDER LINE OUT JACK
Line–level output connection for use in a mono or stereo expansion
configuration. Connect to the power amp input, or the line–in jack on
another guitar amplifier.
simulation circuitry and therefore will sound best linked to a guitar amplifier,
rather than a bass or keyboard amplifier or full-range PA system.
RR. EXPANDER MONO/STEREO SWITCH
Selects either MONO or STEREO RIGHT CHANNEL output for the
EXPANDER jack {QQ}. When this switch is OUT, both the internal speaker
and the EXPANDER jack produce a (summed) MONO signal. When this
switch is IN, the internal speaker produces the LEFT stereo channel, and the
expansion amplifier/speaker produces the RIGHT stereo channel. NOTE:
The Cyber–Deluxe™ amplifier speaker will always produce a summed
MONO signal, regardless of switch position, when the EXPANDER jack is
not used.
SS. EFFECTS LOOP SEND JACK
Output for connection to the input jack of an external effects device.
TT. EFFECTS LOOP RETURN JACK
Input for connection from the output jack of an external effects device.
UU. EFFECTS LOOP LEVEL SWITCH
A 2–position switch for setting compatibility with effects devices:
• Switch OUT (–10dBV) for use with most foot pedal type effects
• Switch IN (+4dBu) for use with most professional rack-mounted effects
✧
e r r . . c c o o m m
This output does not incorporate speaker
w w w w w w . . m m r r g g e
Rear Panel Overview
e a a r r h h e e a a d d . . n
15
n e e t t