Example Of Machine Operation At Sewing - Duerkopp Adler 887 Instruction Manual

10.2 Example of machine operation at sewing

Operator´ s action
Insertion of sewn material.
Pedal treading to position +1.
Pedal release to position 0.
Material position correction.
Pedal treading to position +1.
Pedal treading to position +3.
Pedal release to position 0.
Pedal treading to position -1.
Turning of sewing material
on needle.
Pedal treading to position +5.
Pedal treading to position -2.
Pedal release.
Putting out of sewn material.
Pre-selection:
Needle down at machine stopping in seam
Standard bartacks
Double initial bartack
Double end bartack
Thread trimming on
Foot lowered at stopping in seam
Foot lifted at seam finishing
Machine work
Machine stopped. Needle in upper position. Foot lifted in
accordance with pre-selection.
Foot lowering.
Foot lifting.
Foot lowering.
Sewing of standard double bartack (at speed pre-selected by
producer and subsequent sewing at speed corresponding with
third speed level +3.
Machine stopping with needle down.
Foot lifting.
Foot lowering and subsequent machine running to fifth speed
grade of sewing.
Speed reduction. Sewing of standard double bartack.
Thread trimming under throat plate and machine stopping with
needle up. Foot lifting.
(Foot remains lifted).
GB
25