Description & Features; Specifications; Water Requirements; Power Plug Configurations - Fetco HWD-2105 TOD User Manual

FETCO Temperature on Demand Hot Water Dispenser
®
FETCO
®
Food Equipment Technologies Company
600 Rose Road
Lake Zurich • IL • 60047-0429 • USA
Internet: www.fetco.com
The following variables are adjustable:
Four selectable hot water dispense temperatures ---Water temperature selectable to 158°F/70°C to 203°F/95°C
English and Metric temperature ranges selectable
Maximum single dispense is 23ounces/700cc in 15 seconds maximum dispense time
Standard Electrical Configurations-DOMESTIC & CANADA
Configuration Heater
Code Configuration
H210510
1 X 1.44 kW
H210520
1 X 2.1 kW
Standard Electrical Configurations-DOMESTIC & SPECIALTY
H210530
1 X 3.2 kW
Electrical Configurations- EXPORT & CANADA
H210540
1 X 3.2 kW
Temperature ranges selectable from 158°F/70°C to 203°F/95°C based on 207°F/97°C hot water tank temperature.
*Gallon per hour flow rate based on 65-70°F 18-21°C water mains supply temperature at lowest possible power supply current.
Four selectable hot water dispense temperatures.
Selectable English and Metric temperature units.

Water Requirements:

Dispenser Model
Hot Water Dispenser
24 lbs/10.9kg
HWD-2105 TOD
NEW TECHNOLOGICAL FEATURES
The FETCO hot water dispenser uses new
∫
t
The Touch Function Selector buttons (above and below display screen) alternately dim and brighten when selection is not active.
f
Dispensing and Feature Selections activate when touched. The front panel is clean and uncluttered.
The display screen shows four temperature selections and the readiness status of each level.
Programming, display and error codes are interactive and more intuitive.
Float indicator is built into drip tray to help simplify maintenance and cleaning.

Contact Information

Description & Features
Voltage Phase
120 1
120 1
200-240 1
230 1
† For EXPORT, Cord without plug will be attached
Pressure: 40-75 psig, (276-517kPa)
Minimum Flow Rate: 1½gpm (5.7lpm)
Water connection inlet: ¼ inch male flare fitting
Weights and Capacities
Weight Water tank
(empty) Capacity
3.2 gallon/12 liter
∫
t
Touch Function Selector Technology to operate the hot water dispenser.
f
Phone: (800) 338-2699 (US & Canada)
(847) 719-3000
Fax: (847) 719-3001
Email: sales@fetco.com
techsupport@fetco.com

Specifications

Wires Plug
NEMA 5-15P
2+G
NEMA 5-20P
2+G
NEMA 6-15P
2+G
2+G Cord Only†
Weight
(filled)
50 lbs/22.7kg
2
Maximum
KW
Amp Draw
1.5 12.0
2.2 17.5
2.3-3.3 11.2-13.3
2.9 12.8

Power Plug Configurations

NEMA PLUG CONFIGURATION
G
W
NEMA 5-15P
High Wide
Inches/cm Inches/cm
24 1/2 in/62 cm 9 in/23 cm
Gallons/Hour
4.0 gallon*/15 liter
5.7 gallon*/22 liter
6-8.7gallon*/22.7-33 liter
7.8 gallon*/29.5 liter
G
W
NEMA 5-20P NEMA 6-15P
Deep
Inches/cm
18 1/2 in/47 cm