DigiDesign Mbox 2 Mini Setup Manual page 44

Pro Tools Hardware Settings
In the Hardware Settings dialog, Pro Tools lets you set the default sample rate and clock source
for your system, as well as a range of controls specific to each type of audio interface.
Default Sample Rate
The Sample Rate setting appears as the default sample rate when you create a new session.
(This setting is available in the Hardware Setup dialog only when no session is open.)
You can change the sample rate when creating a new Pro Tools session by selecting a different
sample rate in the New Session dialog. (See the Pro Tools Reference Guide for details.)
To change the default Sample Rate:
1 Choose Setup > Hardware.
Hardware Setup dialog for Mbox 2 Mini
2 Select the sample rate from the Sample Rate pop-up menu.
3 Click OK.
34
Mbox 2 Mini Setup Guide