Turning on
•
Plug into the mains socket.
• Press the main switch (G).
•
Turn the " oven/bread maker" mode selector (R) to the re-
quired position:
•
If the selector is already in the required position, just press
the START/STOP button to activate the chosen mode and
prepare it for programming.
• After 3 minutes, the appliance returns to standby.
Oven/bread maker mode selector
Setting the clock
The first time the appliance is connected to the mains electri-
city supply or after it has been without power for some time, it
emits a beep and four dashes ("-- : --") appear on the display.
To set the time, proceed as follows:
Press the clock button
on the control panel (Q) for at
least 3 seconds.
(The hour flashes).
Set the required hour by repeatedly pressing the
(oven) or
(bread maker).
START/STOP
button on, off and
standby
and
turning the appliance on
buttons on the control panel (Q).
Press the clock button
(The minutes flash).
Set the required minutes by repeatedly pressing the
buttons.
Press the clock button
(The set time is displayed).
If you want to change the time later, repeat the setting proce-
dure described above.
During cooking, you can display the time (if set) by pressing
the clock button
37
.
.
.
en
and