Table of Contents
Advertisement
GRILL HEATING ELEMENT
The heating element is self-cleaning and does not require maintenance.
REPLACING THE OVEN LIGHT BULB
Switch the cooker off at the mains.
When the oven is cool, unscrew and replace the bulb with another one resistant to
high temperatures (300°C), voltage 230-240 V~ (50 Hz), E14 and same power (check
watt power as stamped in the bulb itself) of the replaced bulb.
Note: Oven bulb replacement is not covered by your guarantee.
OVEN TRAY
The oven tray must be correctly
placed on its wire shelf support (fig.
40) then inserted into the side run-
ners (fig. 41).
OVEN FLOOR
The oven floor "F" (fig. 41) can be
easily removed to facilitate clean-
ing.
Remember to replace the floor cor-
rectly afterwards.
Be careful not to confuse the tray
"L" with the oven floor "F".
Figure 41
L
F
Figure 40
37
Hide quick links:
Advertisement
Table of Contents
