TP-Link TL-SF1016DS Installation Manual
10/100mbps unmanaged switch
Hide thumbs
Also See for TL-SF1016DS:
- Installation manual (28 pages) ,
- User manual (16 pages) ,
- Installation manual (28 pages)
Related Manuals for TP-Link TL-SF1016DS
Summary of Contents for TP-Link TL-SF1016DS
- Page 1 Enterprise Networking Solution Installation Guide 10/100Mbps Unmanaged Switch TL-SF1016DS/TL-SF1016 TL-SF1024D/TL-SF1024 TL-SF1048...
-
Page 2: Fcc Statement
Specifications are subject to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO., LTD. Other brands and product names are trademarks of their respective holders. No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from TP-LINK TECHNOLOGIES CO., LTD. - Page 3 Network Engineer Network Administrator Conventions Due to the similarity in structure of TL-SF1016DS/TL-SF1016/TL-SF1024D/ TL-SF1024/TL-SF1048 10/100Mbps Unmanaged Switch series, in this Installation Guide we take TL-SF1016 as an example to illustrate Chapter 2 Installation, Chapter 3 Lighting Protection and Chapter 4 Connection.
-
Page 4: Table Of Contents
Contents Introduction ——————————— 01 Chapter 1 Product Overview ..............01 Features ..................01 Appearance ................01 Chapter 2 Installation ———————————— 04 Package Contents ..............04 Safety Precautions ..............04 Installation Tools..............06 Product Installation ..............07 Chapter 3 Lightning Protection ———————— 09 Cabling Reasonably..............09 Connect to Ground..............11 Equipotential Bonding ............12 Use Lightning Arrester ............13 Connection ———————————... -
Page 5: Introduction
¾ ACCearance Front Panel ■ The front panel of The TL-SF1016 is shown as the following figure. LEDs 10/100Mbps RJ45 Port Figure 1-1 Front Panel of TL-SF1016 The front panel of The TL-SF1016DS is shown as the following figure. Introduction... - Page 6 There is no device linked to the corresponding port or the port is running at 10Mbps Note: Because of the difference among the switch models, some switches don’t have the 100Mbps indicator, such as TL-SF1048, TL-SF1016DS and TL-SF1024D switch. Introduction...
-
Page 7: Rear Panel
10/100Mbps Fast Ethernet Switch 10/100Mbps Por Designed to connect to the device with a bandwidth of 10Mbps or 100Mbps. Each has a corresponding 10/100Mbps LED. Rear Panel ■ The rear panel of the switch is shown as the following figure. Grounding Terminal Power Socket Figure 1-6... -
Page 8: Installation
10/100Mbps Fast Ethernet Switch ChaCter 1 Installation Package Contents Make sure that the package contains the following items. If any of the listed items is damaged or missing, please contact your distributor. One Switch One Power Cord This Installation Guide Two mounting brackets and the fittings Safety Precautions... -
Page 9: Site Requirements
10/100Mbps Fast Ethernet Switch Site Requirements ■ Temperature/Humidity Please keep a proper temperature and humidity in the equipment room. Too high/low humidity may lead to bad insulation, electricity leakage, mechanical property changes and corrosions. Too high temperature may accelerate aging of the insulation materials and can thus significantly shorten the service life of the device. -
Page 10: Installation Tools
10/100Mbps Fast Ethernet Switch Lightening Protection Extremely high voltage currents can be produced instantly when lightning occurs and the air in the electric discharge path can be instantly heated up to 20,000℃. As this instant current is strong enough to damage electronic devices, more effective lightning protection measures should be taken. -
Page 11: Product Installation
10/100Mbps Fast Ethernet Switch Note: These tools are not provided with our product. If needed, please self purchase them. Product Installation Desktop Installation ■ To install the device on the desktop, please follow the steps: Set the device on a flat surface strong enough to support the entire weight of the device with all fittings. - Page 12 10/100Mbps Fast Ethernet Switch After the brackets are attached to the device, use suitable screws (not provided1 to secure the brackets to the rack, as illustrated in the following figure. Rack Figure 2-3 Rack Installation Caution: Please set 5~10cm gaps around the device for air circulation. ■...
-
Page 13: Lightning Protection
10/100Mbps Fast Ethernet Switch ChaCter 1 Lightning Protection Cabling Reasonably In the actual network environment, you may need cable outdoors and indoors, and the requirements for cabling outdoors and indoors are different. A reasonable cabling system can decrease the damage of induced lightning to devices. Note: It's not recommended using Ethernet cables outdoors. -
Page 14: Requirements For Cabling Indoors
10/100Mbps Fast Ethernet Switch Requirements for Cabling Indoors ■ When cabling indoors, keep a certain distance away from the devices that may cause high-frequency interferences, such as down-conductor cable, powerline, power transformer and electromotor. The main cable should be paved in the metal raceway of the access shaft. When ■... -
Page 15: Connect To Ground
10/100Mbps Fast Ethernet Switch Parallel cabling 2~5kVA One is in the grounded metal raceway or metal pipe powerline The both are in the grounded metal raceway or metal pipe Parallel cabling >5kVA One is in the grounded metal raceway or metal pipe powerline The both are in the grounded metal raceway or metal pipe... -
Page 16: Equipotential Bonding
10/100Mbps Fast Ethernet Switch Note: The grounding bar and the ground cable are not provided with our product. If needed, please self purchase them. Connecting to the Ground via the Power Supply ■ If the device is installed in the normal environment, the device can be grounded via the PE (Protecting Earth1 cable of the AC power supply as shown in the following figure. -
Page 17: Use Lightning Arrester
10/100Mbps Fast Ethernet Switch Grounding Terminal Equipotential Bonding Cable Ground Cable Grounding Bar Figure 3-3 Equipotential Bonding When equipotential bonding, please note that the cable should be copper wrapped Kelly with its area being 6mm at least. The shorter cable the better, and use a grounding bar to establish an equipotential bonding point. - Page 18 10/100Mbps Fast Ethernet Switch Signal lightning arrester is used to protect RJ45 ports of the device from lightning. When cabling outdoors, please install a signal lightning arrester before connecting the cable to the device. When purchasing or using a signal lightning arrester, please observe the following rules: The port rate of the signal lightning arrester should match the rate of the desired ■...
-
Page 19: Connection
10/100Mbps Fast Ethernet Switch ChaCter 2 Connection Ethernet Port Connect the Ethernet ports of the switch to the network devices by RJ45 cable as the following figure shown. RJ45 Cable RJ45 Port Figure 4-1 Connecting the Ethernet Port Verify Installation After completing the installation, please verify the following items: There are 5~10cm of clearance around the sides of the device for ventilation and ■... -
Page 20: Initialization
10/100Mbps Fast Ethernet Switch Note: The figure is to illustrate the application and principle. The power plug you get from the package and the socket in your situation will comply with the regulation in your country, so they may differ from the figure above. Initialization After the device is powered on, it begins the Power-On Self-Test. -
Page 21: Appendix B Hardware Speci Cations
10/100Mbps Fast Ethernet Switch ACCendix B Hardware SCecifications Item Content IEEE 802.3 10Base-T Standards IEEE 802.3u 100Base-TX IEEE 802.3x Flow Control 10Base-T: UTP/STP of Cat. 3 or above(maximum 100m1 Transmission Medium 100Base-TX: UTP/STP of Cat. 5 or above(maximum 100m1 Safety & Emissions FCC, CE Transfer Method Store-and-Forward... -
Page 22: Appendix C Technical Support
10/100Mbps Fast Ethernet Switch ACCendix C Technical SuCCort For more help, please go to: http://www.tp-link.com/en/support/faq ■ To download the latest Firmware, Driver, Utility and User Guide, please go to: ■ http://www.tp-link.com/en/support/download For all other technical support, please contact us by using the following details: ■... - Page 23 10/100Mbps Fast Ethernet Switch Russian Federation Tel: 8 (4991 754 5560 (Moscow NO.1 8 (8001 250 5560 (Toll-free within RF1 E-mail: support.ru@tp-link.com Service time: From 9:00 to 21:00 (Moscow time1 *Except weekends and holidays in RF Singapore Tel: +65 6284 0493 Fee: Depending on rate of different carriers.
- Page 24 Website: http://www.tp-link.com E-mail: support@tp-link.com 7106504436 REV4.0.0...