Table of Contents
Advertisement
To enter the waypoint position directly...
·
Place the cursor over "ENTER POSN?" and press the ENT key. The
Waypoint Definition Page will appear with the cursor over waypoint
latitude as illustrated below.
·
Enter the waypoint latitude.
·
Enter the waypoint longitude.
·
With the cursor over "OK?", press the ENT key. The waypoint is now
stored in memory.
To create a waypoint offset from a reference waypoint...
·
Move the cursor over "REF WPT?" and press the ENT key. The
Waypoint Definition Page will appear with the cursor over the reference
waypoint name as illustrated below.
·
Enter the name of the reference waypoint. The position of the
reference waypoint will be displayed on line 2.
·
Enter the bearing from the reference waypoint to the new waypoint.
·
Enter the distance from the reference waypoint to the new waypoint.
The resulting waypoint position will be displayed on line 2.
·
With the cursor over "OK?", press the ENT key. The waypoint is now
stored in memory.
4-3
Hide quick links:
Advertisement
Table of Contents
