Table of Contents
Advertisement
·
Enter DRYTG as the second waypoint of the route.
·
Enter KYWST as the third waypoint of the route. This is the waypoint
where our voyage will end.
If you haven't already guessed, you have just created a route that will take
you from Fort Myers to the Dry Tortugas and on to Key West.
Activate the sample route...
·
Move the cursor over "ACT?" and press the ENT key to activate the
sample route. The active route page will be displayed as illustrated
below.
The sample route is now active. This page displays the waypoint you are
going from (FTMYR) and the waypoint you are going to (DRYTG) on line one
as well as distance and time information on lines 2 and 3. The time
information will be blank until the simulation speed has been entered.
Set the simulation speed
·
Press the NAV key until the CDI Page is displayed as illustrated below.
·
Move the cursor to the field next to "GS" as illustrated below.
15-8
Hide quick links:
Advertisement
Table of Contents
