Cdi And Navigation Summary - Garmin GPS 100 Owner's Manual

5.1 CDI AND NAVIGATION SUMMARY

"Active From" Waypoint "Active To" Waypoint Velocity
Distance Direction
CDI Time/Track
CDI PAGE
The CDI Page displays virtually all the information you need to guide your
craft. Included is a graphical course deviation indicator (CDI) which illustrates
your position relative to the course. The to/from arrow in the center of the CDI
indicates if you are navigating to the waypoint (up arrow) or if you have
passed the waypoint (down arrow). If you have set the CDI alarm, the limits
of the alarm will be displayed with brackets (i.e. "[" and "]") as illustrated. You
may set CDI alarm, CDI sensitivity, and CDI representation of the course
from the Setup Pages (see Sections 11.2 and 11.3 for more details).
During the process of acquiring satellites, the GPS 100 will not provide
navigation data. The area of the CDI will indicate this condition as illustrated
below.
The "active from" and "active to" waypoints on line 1 indicate where you have
come from and where you are going (see Section 7.1 for illustration). When
using the GOTO function, the CDI Page will appear as illustrated below (see
Chapter 6 for more details on the GOTO function).
If the GPS 100 is not navigating to a waypoint (i.e., there is no "active to"
waypoint), the CDI area will indicate this condition as illustrated below.
5-2