GE JKP20 Installation Instructions Manual page 9

27" built-in wall oven
Hide thumbs Also See for JKP20:
Table of Contents

Advertisement

Installation Instructions
IBI Electrical
Connections
cont
New Construction and
Four-Conductor Branch
Circuit Connection
• When installing
in new construction,
or
• When installing
in a mobile home, or
• When installing
in a recreational
vehicle, or
• When local codes do not permit grounding
through neutral:
a. Cut the neutral (white) lead from the crimp.
Re-strip the neutral (white) lead to expose
the proper length of conductor.
__
Ground
m_
__Wire
b. Attach the appliance grounding
lead (green
or bare copper) in accordance
with local
codes. If the residence
grounding
conductor
is aluminum,
see WARNING
on page 8.
c. Connect the oven neutral (white) lead to
the branch circuit neutral (white or gray)
in accordance
with local codes, using a
wire nut.
d. Connect the oven red lead to the branch
circuit red lead and the oven black lead to
the branch circuit black lead in accordance
with local codes, using wire nuts. If the
residence
red, black or white leads are
aluminum
conductors,
see WARNING
on
page 8.
e. Install Junction
Box Cover.
Three-Conductor Branch
Circuit Connection
When connecting
to a three-conductor
branch
circuit, if local codes permit:
a. Connect
the bare oven ground conductor
with the crimped neutral (white) lead to
the branch circuit neutral (white or gray
in color), using a wire nut.
b. Connect
the oven red lead to the branch
circuit red lead in accordance
with local
codes, using a wire nut.
c. Connect
the oven black lead to the branch
circuit black lead in accordance
with local
codes, using a wire nut. If the residence
red, black or white leads are aluminum
conductors,
see WARNING
on page 8.
d. Install Junction
Box Cover.
9

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Jkp25Jkp28Jkp48Jk915Jkp50Jk955 ... Show all

Table of Contents