Controls ....5 Oven ....11, 12 Sabbath Feature ..9, 10 Self-Cleaning Oven .
Do not allow anyone to climb, stand or hang on the door. They could damage the oven, or cause severe personal injury. Be sure the oven is securely installed in a cabinet that is firmly attached to the house structure. Never allow anyone to climb, sit, stand or hang on the oven door.
Flame in the oven can be smothered completely by closing the oven door and turning the oven off or by using a multi- purpose dry chemical or foam-type fire extinguisher. Never leave jars or cans of fat drippings in or near your oven.
Do not use the oven to dry newspapers. If overheated, they can catch on fire. Do not use the oven for a storage area. Items stored in an oven can ignite. Do not leave paper products, cooking utensils or food in the oven when not in use.
Press the CLEAR/OFF pad. Allow the oven to cool for one hour. Put the oven back into operation. If the function error code repeats, disconnect the power to the oven and call for service.
Sabbath feature, which will have to be reset. 12-Hour Shut-Off With this feature, should you forget and leave the oven on, the control will automatically turn off the oven after 12 hours during baking functions or after 3 hours during a broil function.
Delay Start function. www.GEAppliances.com NOTE: On models with touch pad controls for both ovens, this cancels the end of cycle tone for both ovens. On models with oven knob(s), this feature is not available for the lower oven.
Hld ON. Press the START pad to activate the cook and hold feature and leave the control set in this special features mode. NOTE: On models with oven knob(s), this feature is not available for the lower oven.
NOTE: The oven light comes on automatically (on some models) when the door is opened and goes off when the door is closed. The bulb may be removed. See the Oven Light Replacement section. On models with a light switch on the control panel, the oven light may be turned on and left on.
12 hours. no shdn indicates that the oven will not automatically turn off. Press the START pad. NOTE: If a power outage occurred while the oven was in Sabbath mode, the oven will automatically turn off and the oven control must be reset.
Using the oven. To avoid possible burns, place the shelves in the desired position before you turn the oven on. Before you begin… The shelves have stop-locks, so that when placed correctly on the supports, they will stop before coming completely out, and will not tilt.
When broiling is finished, press the CLEAR/OFF pad. NOTE: On some models, the lower oven is controlled with a knob. To set the oven for broiling, turn the knob to BROIL. Turn the knob to OFF when broiling is complete.
KITCHEN TIMER ON/OFF pad is pressed. The 6-second tone can be canceled by following the steps in the Special features of your oven control section under Tones at the End of a Timed Cycle. If the remaining time is not in the display...
Using the timed baking and roasting features. On models with touch pad controls for both ovens, you can use timed baking in one oven while using self-clean in the other; you can also use timed baking in both ovens at the same time.
You may find that your new oven cooks differently than the one it replaced. Use your new oven for a few weeks to become more familiar with it. If you still think your new oven is too hot or too cold, you can adjust the thermostat yourself.
Using the self-cleaning oven. The oven door must be closed and all controls must be set correctly for the cycle to work properly. Before a Clean Cycle We recommend venting your kitchen with an open window or using a ventilation fan or hood during the first self-clean cycle.
The oven door must be closed and all controls must be set correctly for the cycle to work properly. How to Delay the Start of Cleaning You can change the clean time to any time between 3 hours and 5 hours, depending on how dirty your oven is.
Care and cleaning of the oven. Be sure electrical power is off and all surfaces are cool before cleaning any part of the oven. How to Remove Packaging Tape To assure no damage is done to the finish of the product, the safest way to remove...
Soap-filled steel-wool pads may also be used. If necessary, you may use an oven cleaner. Follow the package directions. Clean the inside of the oven window with a mild non-scratching cleaner and a damp cloth.
Wearing latex gloves may offer a better grip. CAUTION oven light bulb, disconnect the electrical power to the oven at the main fuse or Bulb circuit breaker panel. Be sure to let the light cover and bulb cool completely.
(The sensor is located at the top of the oven.) Carefully wipe the sensor clean after each oven cleaning, being careful not to move the sensor as a change in its position could affect how the oven bakes.
• Make sure you press the BROIL HI/LO pad. • See the Broiling Guide. • Use the broiling pan and grid that came with your oven. Make sure it is cool. • Use the broiling pan and grid that came with your oven.
• Replace the fuse or reset the circuit breaker. • See the Using the oven section. • Allow the oven to cool and reset the controls. • See the Using the self-cleaning oven section. • This is normal. • Press the CLEAR/OFF pad. Open the windows to rid the room of smoke.
• The BAKE and BROIL HI/LO pads must be pressed at the same time and held for 3 seconds. • Reset the clock. If the oven was in use, you must reset it by pressing the CLEAR/OFF pad, setting the clock and resetting any cooking function.
You can rest easy, knowing that all your valuable household products are protected against expensive repairs. Place your confidence in GE and call us in the U.S. toll-free at for more information.
In Use Month * Please provide your e-mail address to receive, via e-mail, discounts, special offers and other important communications from GE Appliances (GEA). Check here if you do not want to receive communications from GEA’s carefully selected partners. GE Appliances...
Any part of the oven which fails due to a defect in materials or workmanship. From the date of the During this full one-year warranty, GE will also provide, free of charge, all labor original purchase and in-home service to replace the defective part.
Caution must be exercised, since improper servicing may cause unsafe operation. Contact Us If you are not satisfied with the service you receive from GE, contact us on our Website with all the details including your phone number, or write to: General Manager, Customer Relations Register Your Appliance Register your new appliance on-line—at your convenience! Timely product registration will allow for...