Drobo Robotics User Manual page 26

In the DroboShare settings section (Advanced Controls > Tools tab), you
can alter the network settings, security, and DroboApps configurations
on your DroboShare. If your network requires your DroboShare to have
a static IP address, then this can be changed in the Network tab. Under
the Security tab, you can set a username and password to protect all the
volumes that are being shared on your DroboShare. The DroboApps tab,
gives you the option to enable the running of third-party applications on
your DroboShare. For more information on DroboApps, please visit
www.drobo.com/droboapps.
To configure DroboShare to fit your unique network design, launch
Drobo Dashboard and click the "Advanced Controls" button. Select the
"Tools" tab and click the "Setup" button in the DroboShare section.
st nd
Tip: If you have an existing 1 /2 Generation Drobo, place it in Standby (see
"What to do when not using Drobo" on page 17) and then follow the steps to
connect Drobo to DroboShare (page 18).
21