Chicago Electric Double Cut Saw 68316 Owner's Manual & Safety Instructions page 14

Cutting Techniques
Rectangular Pipe
Feed blade from corner to corner.
Pipes
Feed blade through object
until it reaches lower edge,
keeping blade at 90º angle.
Thin Plate
Feed blade down about 3/8" and start cut.
Page 14
3/8
in.
For technical questions, please call 1-800-444-3353.
U-Section
Feed blade from corner to corner
(where opposite corner would be).
Flat Bar Iron
Feed blade at a 90º angle
to the work surface.
REV 11h
SKU 68316