Dog List Setup; Dog Alerts Setup; Display Setup - Garmin Astro Dog Tracking System Owner's Manual

Dog List Setup

To open the Dog List page:
Press MENU > MENU >
List.
To view the Dog Info page, move the dog on the
list, or remove the dog from the list:
Select a dog on the list > ENTER.

Dog Alerts Setup

To turn Dog Alerts on or off:
1. Press MENU > MENU >
Alerts.
2. Use the Rocker to select an alert > ENTER >
On).
• On-Point Alert–indicates that the dog is on-point.
• Treed Alert–indicates that the dog has treed
quarry and has confined its own movements to a
small area for 60 seconds.
• GPS Lost Alert–indicates that the dog's DC 30
has lost GPS satellite signals.
Astro Dog Tracking System Owner's Manual
Advanced > Settings > Dog
Advanced > Settings > Dog
Off (or
• Lost Communication Alert–the Astro 220 is not
receiving the signals from the DC 30.

Display Setup

To configure the Astro 220 screen settings:
Press MENU > MENU >
Display.
• Display Mode–sets the display to Day, Night, or
Auto mode. Select Auto to automatically switch to
night mode at sunset and to day mode at sunrise.
• Daytime Color Scheme–sets the color scheme
used in Day mode.
• Nighttime Color Scheme–sets the color scheme
used in Night mode.
• Backlight Timeout–sets the backlight to time out
after a period of time has elapsed (to save battery
power) or to stay on.
• Backlight Level–increases or decreases the
backlight intensity.
Settings
Advanced > Settings >