Changing Compass Settings
To change Compass settings:
1. On the Compass page, press MENU.
2. Select an option > ENTER:
•
Sight 'N Go–allows you to navigate to an object
within your sight by pointing the unit at it
•
Stop (or Resume) Navigation–stops or resumes
your current navigation.
•
Recalculate–recalculates the path to a destination.
•
Course or Bearing Pointer–auto routes between
the course pointer and the bearing pointer.
•
Data Fields–specifies 2, 3 or 4 data fields that
appear on the Compass page.
•
Change Data Fields–selects the type of data you
want to show in the data fields
•
Calibrate Compass–opens the Compass
Calibration page for calibrating the compass
(page
6).
•
Restore Defaults–restores compass settings to
the default settings.
Astro Dog Tracking System Owner's Manual
To change the type of data on the compass:
1. On the Compass page, press MENU >
2. Use the Rocker to select a field.
3. Press ENTER > select an option > ENTER.
(page
27).
To use Sight 'N Go to navigate:
1. On the Compass page, press MENU >
2. Hold the unit at eye level and line up the two sighting
(page
27).
Fields.
The bearing pointer points to the top of the compass.
marks with a distant object.
GPS Applications
Change Data
Sight 'N
Go.
Sighting
marks