Turning The Astro 220 On; Charging The Dc 30 - Garmin Astro Dog Tracking System Owner's Manual

Getting Started

Turning the Astro 220 On

To turn the Astro 220 on, press and hold the
key.
The first time you turn the Astro 220 on, a message
appears followed by a prompt. Thereafter, when you turn
the Astro 220 on, the Garmin Logo appears, followed by
the Dog Tracker page.
Garmin Logo
To adjust the backlight level:
1. Press and quickly release the

Power
Dog Tracker Page
Power key.
2. Press the Rocker up arrow or down arrow to adjust
the brightness levels. Or, press and quickly release
the Power key to cycle through the brightness
levels.
3. Press ENTER to select a brightness level.
See page 45 to change the display colors and backlight
timeout.

Charging the DC 30

Fully charge the DC 30 before using it on a hunt. DC 30
charging temperature range is 32°F-113°F (0°C-45°C).
To charge the DC 30:
1. Connect the vehicle power cable or the AC adapter to
an appropriate electrical source.
2. Slide the connector into the battery charging port on
the side of the DC 30.
Blue LED
Astro Dog Tracking System Owner's Manual
Battery charging port