Garmin Astro Dog Tracking System Owner's Manual page 18

Dog Tracking
Dog Tracker Page Options Menu
To open the Dog Tracker page Options menu:
On the Dog Tracker page, press MENU.
• Show Info–opens the Dog Information page for the
selected dog.
• Pause (or Resume) All Tracking–pauses tracking
of all dogs.
• Calibrate Compass–calibrates the compass
(page 6).
• View Dog List–opens the Dog List to add or
remove dogs.
• Small Numbers (or Big Numbers)–changes the
size of the dog descriptions on the Dog Tracker
page. Press the left or right arrows on the Rocker
to scroll through multiple dogs in the Big Numbers
mode.
Adding Dogs to the Dog List
If you purchase additional DC 30 units, you can link them
to the Astro 220 using the setup wizard in the Dog List.
To link, the Astro 220 must be close enough to the DC 30
to touch it, or you must know the DC 30 ID number.

To add a new dog to the list:
1. On the Dog Tracker page, press MENU >
<Add New> > ENTER to open the setup wizard.
2. Use the Rocker and ENTER to select and confirm
options. By default, the new dog is named "Dog" and
an ID number is randomly assigned.
NotE: The setup wizard may indicate that there is a
conflict with the ID number of another dog. To resolve
the conflict, follow the instructions in the setup wizard
and in "Conflicting Dog Signals."
Conflicting Dog Signals
Each dog you track has its own ID number. If two dogs
within range of the Astro 220 have the same ID, the
Astro 220 warns you of a conflicting ID signal. It then
opens a setup wizard to guide you through the process of
resolving the conflict.
If necessary, you can manually assign a new ID number
to a dog. When possible, you should allow the Astro 220
to automatically assign IDs.
Astro Dog Tracking System Owner's Manual
Dog List >