Averaging A Marked Location; Projecting A Location - Garmin Astro Dog Tracking System Owner's Manual

Mark Location
To edit a marked location:
1. Press MENU > MENU >
Locations to open the Location page.
2. Select the location you want to edit.
3. Select the appropriate field to open the on-screen
keypad. After entering and confirming your changes,
select OK (on the keypad).
To move a marked location on the Map page:
1. Press MENU > MENU >
Locations.
2. Select the marked location you want to edit.
3. Select Map to show the marked location on the map.
4. Press ENTER to place a MOVE marker next to the
marked location.
5. Use the Rocker to move the marked location to a new
location on the map, and press ENTER.

Advanced > Find > Marked
Advanced > Find > Marked

Averaging a Marked Location

You can average a marked location for more accuracy.
When averaging, the Astro 220 takes several readings at
the same location and uses the average value to provide
more accuracy.
To calculate your current average location:
1. Press MARK > New >
2. When the Estimated Accuracy field reaches the level
of accuracy you want, select

Projecting a Location

You can create a new location by projecting the distance
and bearing from a marked location to a new location.
To project a location:
1. Press MENU > MENU >
Locations.
2. Select the location > MENU >
3. Enter the bearing and distance to the projected
location in the appropriate fields at the bottom of the
page. To navigate to the location, select
Astro Dog Tracking System Owner's Manual
Avg to begin averaging.
Save > OK.
Advanced Find Marked
> >
Project Location.
Go To.