Settings; System Setup - Garmin Astro Dog Tracking System Owner's Manual

Settings

Settings
The Settings menu (MENU > MENU >
Settings) customizes the operation of your Astro 220.

System Setup

To open the System page:
Press MENU > MENU >
System.
• GPS–sets the unit to operate in Normal mode,
Battery Saver mode, GPS Off, or Demo Mode.
• WAAS/EGNOS–enables or disables WAAS (Wide
Area Augmentation System) in the U.S., or EGNOS
(European Geostationary Navigation Overlay
Service).
• Battery Type–selects the battery type (alkaline,
NiMH, or lithium).
• External Power Lost–selects whether the
Astro 220 stays on or turns off when external
power is removed.

Advanced
>
Advanced > Settings >
• Proximity Alarms–turns all proximity alarms on or
off.
To restore system defaults and view system
information:
On the System page, press MENU.
• Restore Defaults–restores system settings to the
default settings.
• View Card Info–displays the microSD card status.
• Mass Storage Mode–allows you to use the
microSD card as a data-storage device
• Software Version–displays the Astro 220 software
version, the GPS SW version, and the unit
identification number.
NotE: View Card Info
available only when a microSD card is installed.
Astro Dog Tracking System Owner's Manual
and Mass Storage Mode are