Summary: Packet Statistics; Figure 10 Summary: Packet Statistics; Table 6 Summary: Packet Statistics - ZyXEL Communications P-334U User Manual

Table 5 Summary: DHCP Table (continued)
LABEL
MAC Address
Refresh

2.4.4 Summary: Packet Statistics

Click the Packet Statistics (Details...) hyperlink in the Status screen. Read-only information
here includes port status and packet specific statistics. Also provided are "system up time" and
"poll interval(s)". The Poll Interval(s) field is configurable.

Figure 10 Summary: Packet Statistics

The following table describes the labels in this screen.

Table 6 Summary: Packet Statistics

LABEL
Port
Status
TxPkts
RxPkts
Collisions
Tx B/s
Chapter 2 Introducing the Web Configurator
DESCRIPTION
This field shows the MAC address of the computer with the name in the Host Name
field.
Every Ethernet device has a unique MAC (Media Access Control) address. The MAC
address is assigned at the factory and consists of six pairs of hexadecimal characters,
for example, 00:A0:C5:00:00:02.
Click Refresh to renew the screen.
DESCRIPTION
This is the WAN, LAN or WLAN port.
For the LAN ports, this displays the port speed and duplex setting or Down when
the line is disconnected.
For the WAN port, it displays the port speed and duplex setting if you're using
Ethernet encapsulation and Idle (line (ppp) idle), Dial (starting to trigger a call)
and Drop (dropping a call) if you're using PPPoE or PPTP encapsulation. This
field displays Down when the line is disconnected.
For the WLAN, it displays the transmission rate when the WLAN is enabled and
Down when the WLAN is disabled.
This is the number of transmitted packets on this port.
This is the number of received packets on this port.
This is the number of collisions on this port.
This displays the transmission speed in bytes per second on this port.
P-334U/P-335U User's Guide
47