Summary: Packet Statistics; Figure 23 Summary: Packet Statistics; Table 6 Summary: Packet Statistics - ZyXEL Communications NBG318S User Manual

Chapter 3 Introducing the Web Configurator
Table 5 Summary: DHCP Table (continued)
LABEL
MAC Address
Refresh

3.4.6 Summary: Packet Statistics

Click the Packet Statistics (Details...) hyperlink in the Status screen. Read-only information
here includes port status, packet specific statistics and "system up time". The Poll Interval(s)
field is configurable.

Figure 23 Summary: Packet Statistics

The following table describes the labels in this screen.

Table 6 Summary: Packet Statistics

LABEL
Port
Status
TxPkts
RxPkts
Collisions
Tx B/s
Rx B/s
Up Time
System Up Time
52
DESCRIPTION
This field shows the MAC address of the computer with the name in the Host Name
field.
Every Ethernet device has a unique MAC (Media Access Control) address. The MAC
address is assigned at the factory and consists of six pairs of hexadecimal
characters, for example, 00:A0:C5:00:00:02.
Click Refresh to renew the screen.
DESCRIPTION
This is the NBG318S's port type.
For the LAN ports, this displays the port speed and duplex setting or Down
when the line is disconnected.
For the WAN port, it displays the port speed and duplex setting if you're using
Ethernet encapsulation and Idle (line (ppp) idle), Dial (starting to trigger a call)
and Drop (dropping a call) if you're using PPPoE or PPTP encapsulation. This
field displays Down when the line is disconnected.
For the WLAN, it displays the maximum transmission rate when the WLAN is
enabled and Down when the WLAN is disabled.
This is the number of transmitted packets on this port.
This is the number of received packets on this port.
This is the number of collisions on this port.
This displays the transmission speed in bytes per second on this port.
This displays the reception speed in bytes per second on this port.
This is the total amount of time the line has been up.
This is the total time the NBG318S has been on.
NBG318S User's Guide