To Set A Clean Cycle; To Stop A Cycle; After The Cycle - Kenmore 911.9209 Series Use And Care Manual

CARE ANDCLEANING
Self.Cleaning Cycle (cent.)
1o For best results, follow the steps
in PREPARING YOUR OVEN
2. Slide the self-clean lock handle to
the right as far as it will go Do not
force the handle
Press the STOP/CLEAR pad
Wait until the oven has cooled below
the locking temperature to unlatch
the door You will not be able to
open the door right away unless
the oven has cooled below the
locking temperature
3. Press the SELF
CLEAN pad
(_ _4. Pressthe,&or, pads until the
desired Clean Time
is displayed
The Clean Time is normally 4 hours
and 20 minutes You can change the
Clean Time to any time between 3
and 5 hours, depending on the
amount of soil in your oven
(_ 5. Press the START
pad
The self-clean cycle will automatically
begin after CLEAN is displayed and
the time countdown appears in the
display
While the oven is self-cleaning, you
can press the CLOCK pad to display
the time of day TO return to the clean
countdown, press the SELF CLEAN
pad
The oven shuts off automatically when
the self-clean cycle is complete, and
0:0O wilt flash in the display
6. Slide the latch handle to the left as
far as it will go and open the door
After the cycle, you may notice some
white ash in the oven Just wipe it up
with a damp cloth or sponge
If white spots remain, scrub them
with a soap-filled scouring pad Be
sure to rinse thoroughly These are
usually deposits of salt that cannot be
removed during the cycle
If for any reason you are not
satisfied with the cleaning
results, just repeat the cycle,,
25