Brocade Communications Systems BR-1010 Administrator's Manual page 204

B
port
--stats
--statsclr
--query
--speed
--dfsize
--topology
Example
bcu port --list
Port#
------------------------------------------------------------------------
1/0
1/1
2/0
186
Displays the physical port-level statistics.
port_id Specifies the ID of the port for which you want to display statistical
information.
Clears port-level statistics.
port_id Specifies the ID of the port for which you want to clear statistical information.
Queries and displays port-related information for a port.
port_id Specifies the ID of the port for which you want to display information.
Queries or sets the port speed. The port speed can be changed dynamically
(when the port is enabled). If the port is disabled, the new port speed setting
takes effect when the port is re-enabled.
port_id Specifies the ID of the port for which you want to set the port speed.
speed Specifies the port speed. Auto-negotiate is the only supported speed value.
Queries or sets the port's maximum receive data field size. If you do not
specify a value, the current receive buffer size displays.
Note: The new receive data field size takes effect when the port is re-enabled.
port_id Specifies the ID of the port for which you want to set the data field size.
df_size Indicates the maximum supported receive data field size, in decimal value. If
set to auto, the driver default value displays. Possible values are 512, 1024,
2048, and 2112.
Queries or sets the port topology.
port_id Specifies the ID of the port for which you want to display or set the topology.
auto|p2p|loop Specifies the topology type. Supported topology modes are as follows:
•
auto - auto-discovers the topology
•
p2p - point-to-point
•
loop
Note: The topology setting will take effect after the port - -disable and
port - -enable commands are executed.
Type PWWN/MAC
cee 00:05:1e:8e:b6:02
fcoe 10:00:00:05:1e:8e:b6:02
eth 00:05:1e:8e:b6:04
cee 00:05:1e:8e:b6:03
fcoe 10:00:00:05:1e:8e:b6:03
eth 00:05:1e:8e:b6:05
fc 10:00:00:05:1e:0f:1a:b1
FC Addr/ Media State
Eth dev
-- sw CEE Linkup
860b03 Linkup
eth2 Linkup
-- sw CEE Linkup
860d03 Linkup
eth3 Linkup
8c0e00 sw Linkup
Brocade Adapters Administrator's Guide
Spd
10G
10G
4G *
53-1001256-01