Brocade Communications Systems BR-1010 Administrator's Manual page 173

--stats
--statsclr
Example Here is an example of the output when authentication is successful:
bcu auth –-show 1/0
port
1/0
Here is an example of the output when authentication failed:
bcu auth –-show 1/0
port
1/0
Here is an example of the output when authentication is not enabled:
bcu auth –-show 1/0
port
1/0
bcu auth -- policy 2/1 on
Authentication turned on
bcu auth -- policy 2/1 off
Authentication turned off
bcu auth -- secret 5/0 "mypasswd"
Authentication secret set
bcu auth -- reinit 4/1
Authentication restarted
bcu auth -- stats 4/1
successes: 1
failures: 0
auth_rx_stats:
auth_rjts: 0
auth_negs: 0
auth_dones: 0
dhchap_challenges: 2
dhchap_replies: 0
dhchap_successes: 1
Brocade Adapters Administrator's Guide
53-1001256-01
port_id Specifies the ID of the port for which you want to display information.
Displays the authentication statistics.
port_id Specifies the ID of the port for which you want to display information.
Clears the authentication statistics.
port_id Specifies the ID of the port for which you want to clear statistical information.
Port Status Auth
Linkdown success
Port Status Auth
Linkdown failed
Port Status Auth
Linkup no_auth
Hash Type Group Type
MD5 DH-NULL
Hash Type Group Type
MD5 DH-NULL
Hash Type Group Type
B
auth
155