Brocade Communications Systems BR-1010 Administrator's Manual page 165

Boot commands
boot over SAN commands apply to the 8 Gbps HBA only.
bcu boot
Converged Enhanced Ethernet (CEE) commands
bcu cee
Debug commands
bcu debug
Diagnostic commands
bcu diag
Windows driver configuration commands
bcu drvconf
Ethernet diagnostic commands
bcu ethdiag
Ethernet IOC commands
bcu ethioc
Ethernet Log command
Brocade Adapters Administrator's Guide
53-1001256-01
--blunZone -c <cfg> -p <port_wwn> -r <rport_wwn> -l <lun_id | lun#>
--upload [adapter_id] <image_file> [-a]
--query <port_id>
--stats <port_id>
--statsclr <port_id>
--portlog <port_id>
--portlogclear <port_id>
--portlogctl <port_id> <enable | disable>
--sfpshow <port_id>
--tempshow <ad_id>
--beacon <port_id> {on | off} [<duration>]
--pciloopback <port_id> [-p <pattern>] [-c <frame_count>]
--loopback <port_id> [-t <loopback_type>] [-s <speed>]
[-c <frame_count>] [-p <pattern>]
--memtest <ad_id>
--queuetest <port_id>
--key <key_name>
--val <value>
Possible key_name and value ranges are:
•
key = bfa_ioc_queue_depth, value range [>0] default = 2048
•
key = bfa_lun_queue_depth, value range [>0] default = 32
•
key = ioc_auto_recover, value range [0-1] default = 1
•
key = rport_del_timeout, value range [>0] default = 90
•
key = msix_disable, value range [0-1] default = 1
--loopback <port_id> [-t <loopback-type>] [-c <frame_count>] [-p pattern]
--enable <port_id>
--disable <port_id>
--stats <port_id>
--statsclr <port_id>
--query <port_id>
B
BCU commands
147