Brocade Communications Systems BR-1010 Administrator's Manual page 166

B
BCU commands
bcu ethlog
Ethernet Port commands
bcu ethport
FC diagnostic commands
bcu fcdiag
FCP initiator mode commands
Note: fcpim - -mpiomode is not supported on Solaris platforms.
bcu fcpim
IO Controller (IOC) commands
bcu ioc
Log commands
bcu log
Logical port (lport) commands
bcu lport
Port commands (physical port)
bcu port
148
--level <port_id>
--stats <port_id>
--statsclr <port_id>
--fcping <port_id> <rpwwn> [-l lpwwn]
--fctraceroute <port_id> <rpwwn> [-l lpwwn]
--fcecho <port_id> <rpwwn> [-l lpwwn]
--linkbeacon <port_id> {on|off}
--scsitest <port_id> <rpwwn> [-l lpwwn]
--query <port_id> <rpwwn> [-l <lpwwn>]
--stats <port_id> <
--statsclr <port_id>
--modstats <port_id>
--modstatsclr <port_id>
--pathtov <port_id> tov
--qdepth <port_id> <q_depth_value>
--stats <port_id>
--statsclr <port_id>
--enable <port_id>
--disable <port_id>
--query <ioc_id>
--intr <ioc_id> <-coalesce | c> {on | off} [<Latency> <Delay>]
--level <port_id> [<critical | error | warning | info>] [-m <fw | ha1 |
fcs | drv | aen | all>]
--list <port_id>
--query <port_id> [-l <lpwwn>]
--stats <port_id> [-l <lpwwn>]
--statsclr <port_id> [-l <lpwwn>]
--list
--name <port_id> [port_name]
--enable <port_id>
Brocade Adapters Administrator's Guide
53-1001256-01