Brocade Communications Systems BR-1010 Administrator's Manual page 198

B
IOC
Example
# bcu ioc --stats 1/0
Num suspends: 7
bcu ioc --statsclr 1/0
ioc stats cleared.
bcu ioc --enable 1/0
ioc is enabled
bcu ioc --enable ad1_p0
ioc is already enabled
bcu ioc --disable 1/0
ioc is disabled
bcu ioc --disable ad1_p0
ioc is already disabled
bcu port --intr 1/0 --coalesce off
interrupt coalescing has been turned off
bcu ioc --intr 1/0 --coalesce on
interrupt coalescing has been turned on
bcu ioc --intr 1/0 --coalesce on --latency xxx --delay xxx
interrupt coalescing has been turned on
bcu ioc --intr 1/0 --coalesce on --latency xxx --delay xxx
interrupt coalescing parameter set failed. Latency/delay value out of range
See Also "adapter"
"lport"
180
delay Sets the delay timeout interrupt value. A delay can be between 0 to 1125
microseconds. A delay value of 0 disables the delay timeout interrupt.
Brocade Adapters Administrator's Guide
53-1001256-01