Brocade Communications Systems BR-1010 Administrator's Manual page 117

Field
Operating Speed
Max Speed Supported
Operating Topology
Frame Data Field Size
Hardware Path
# of Lports
Operating Parameters
MPIO Mode State
Path Time Out
Logging Level
Target Rate Limit
Default Rate Limit
FC-SP Parameters
Authentication
Status
Algorithm
Group
Error Status
Using the property panel
Refer to the following topics for specific procedures using this dialog box:
•
•
•
•
Brocade Adapters Administrator's Guide
53-1001256-01
"Enabling and disabling rate limiting on the adapter side using the GUI"
"Enabling and disabling rate limiting on the adapter side using the BCU"
"Configuring beaconing using the GUI"
"Configuring beaconing using the GUI"
FCoE port properties (CNA only)
Description
The configured speed of the FCoE port.
The maximum speed that is supported on the FCoE port.
The topology setting. Options include auto, point-to-point, and loop.
The frame size, in bytes, of the FCoE port.
The hardware path of the CNA.
The number of logical ports.
Indicates whether MPIO is on or off.
The value between 0 and 60 that specifies the time-out session.
Note: You can only enable or edit the path time out when MPIO is
disabled.
The port logging level. Values include Log Critical, Log Error, Log
Warning, and Log Info.
Indicates that target rate limiting is disabled, because this feature is
not supported on the FCoE port.
The default rate limit, which is not applicable, because target rate
limiting is not supported on the FCoE port.
Indicates whether FC-SP authentication is on or off.
The status of FC-SP authentication.
The configured authentication algorithm.
The DH group, which is DH-null (group 0) which is the only option.
The health status of the Fibre Channel Security Protocol parameters.
A
99