Brocade Communications Systems BR-1010 Administrator's Manual page 140

A
Port Properties panel (HBA only)
Field
Queue Depth
Interrupt Control Coalesce
Interrupt Control Latency
Interrupt Control Delay
Operating Parameters
Beacon State
Link Beacon State
MPIO Mode State
Path Time Out
Logging Level
Persistent Binding
Target Rate Limit
Default Rate Limit
FC-SP Parameters
Authentication
Status
Algorithm
Group
Error Status
QoS Parameters
Configured QoS State
Operating QoS State
Total BB Credit
Priority Levels
Using the property panel
Refer to the following topics for specific procedures using this dialog box:
•
•
•
•
•
•
122
"Configuring the port speed using the GUI"
"Specifying the maximum frame size using the GUI"
"Specifying the maximum frame size using the GUI"
"Specifying Path Time Out using the GUI"
"Configuring the HCM logging level using the GUI"
"Configuring the queue depth using the GUI"
Description
The number of I/O operations that can be run in parallel on a device.
Indicates whether interrupt control is on or off.
Sets the interrupt control latency value.
Sets the interrupt control delay value.
Indicates whether beaconing is on or off.
Indicates whether link beaconing is on or off.
Indicates whether multipathing mode is on or off.
The value between 0 to 60 that specifies the time out session. Note
you can only enable or edit the path time out when MPIO is disabled.
The port logging level. Values include Log Critical, Log Error, Log
Warning, and Log Info.
Indicates whether persistent binding is on or off.
Indicates whether target rate limiting is on or off.
Select the target rate limit from the list. Options include 1 Gbps (the
default), 2 Gbps, and 4 Gbps.
Indicates whether FC-SP authentication is on or off.
The status of FC-SP authentication.
The configured authentication algorithm.
The DH Group (DH Null, group 0 is the only option).
The health status of the Fibre Channel Security Protocol parameters.
Indicates whether QoS is enabled or disabled.
Indicates whether QoS is online or offline.
The number of receive buffers.
QoS priority levels. Values include High, Medium, and Low.
Brocade Adapters Administrator's Guide
53-1001256-01