Using The Optional Marine Remote Control - Garmin GPSMAP 3206 Owner's Manual

Using the Optional Marine Remote Control

Use the keypad on the optional Marine Remote Control to operate your
GPSMAP 3206/3210 from a distance. Contact your Garmin dealer or Garmin
Product Support to purchase the Marine Remote Control.
To operate the remote control, point the IR (infrared) window on the remote
toward the unobstructed IR window on the lower-right corner of the
GPSMAP 3206/3210.
All keys on the remote control operate in the same manner as the keypad on the
GPSMAP 3206/3210. Each key's primary function appears on the key. To activate
the secondary functions for the ADJ/MENU, NAV/MOB, DATA/CNFG, and
Thumb Stick (ENTER/MARK) keys, press and hold the key.
The Thumb Stick combines the operations of the ROCKER and
ENTER/MARK key. Use it to select menu options, change settings, enter data,
and confirm entry. You can also control movement of the pointer on the Map
Page. Press ENTER on the Thumb Stick to select a highlighted item or begin
data entry. Press and hold the Thumb Stick to mark a waypoint.
Installing the Remote Control Batteries
The remote requires two AAA alkaline batteries. To install the batteries, press
down on the battery door clip, and then pull the battery door away from the
remote. Install the batteries observing the correct polarity (see the inside of the
battery compartment). Replace the cover, and make sure it is closed all the way.
NOTE: The remote is for use in shaded or enclosed environments. Direct
sunlight interferes with infrared operation. The Marine Remote Control is NOT
waterproof.
GPSMAP 3206/3210 Owner's Manual
g s > u gPsMaP 3206/3210 K
ettIng tarted sIng the
IR wndow
ZOOM RANGE
Thumb Stck
QUIT
PAGE
ENTER
ADJ NAV
MENU MOB
DATA
FCTN
CNFG
ABC
1
2
GHI JKL
5
4
PQRS TUV
WXYZ
7
8
+ -
0
Marine Remote Control
eYPad
DEF
3
MNO
6
9
3