Using Additional Map Data; Using The Map Pointer - Garmin GPSMAP 3206 Owner's Manual

3. Press right on the ROCKER to move to the next character on the line
or press left to move back to the previous character. Press left on the
ROCKER from the first character position to clear the field. If there are
more than two lines of data, keep pressing right on the ROCKER to go to
the next line.
4. Press ENTER to accept data and move to the next programmable field.
Not all data fields are programmable. When moving about a page with these
fields, the highlight skips them.

Using Additional Map Data

The GPSMAP 3206/3210 comes preloaded with the latest Marine Detail
Charts of the United States coastline (including Alaska and Hawaii) using
BlueChart g2™ technology. This cartography features integrated mapping, 2-D
®
or 3-D map perspective, tide and current data, improved IALA symbols, navaids,
marinas, boat ramps, roads, and more.
With optional preprogrammed BlueChart g2 Garmin data cards, you can access
additional data including highly detailed coastal roads and points of interest such
as restaurants, lodging, local attractions and more. Full-color aerial photographs
of ports, marinas, bridges, and navigational landmarks are also included on many
preprogrammed BlueChart g2 data cards.
See your Garmin dealer or visit the Garmin Web site (www.garmin.com) for
more information on available pre-programmed Garmin data cards and other
MapSource programs.
NOTE: When networking with a Garmin GPSMAP 4000 or 5000 series unit,
map data is not shared.
GPSMAP 3206/3210 Owner's Manual
b
asIc

Using the Map Pointer

Use the map pointer to pan away from your current location and scroll to other
map areas around the world (even outside of your current detail coverage). As
you pan past the edge of the current map display, the screen actively scrolls
forward to provide continuous map coverage. An hourglass symbol appears by
the pointer while the unit is busy drawing new map detail.
Controlled by the ROCKER, the map pointer is an important tool that can be
used to pan to other map locations, mark and edit waypoints and routes, and
review location data of on-screen map items and waypoints.
Map tem name, ponter coordnates,
dstance, and bearng
To move the map pointer:
Press the ROCKER to move the map pointer up, down, left, right, or
diagonally.
o > u gPsMaP 3206/3210
PeratIon sIng the
Map
ponter
11