User Waypoints - Garmin GPSMAP 3206 Owner's Manual

User Waypoints

The User sub tab on the Points tab shows a master list of all waypoints currently
stored in memory. From the User sub tab, you can review, edit, rename, or delete
individual waypoints, or delete all user waypoints. The number of available and
used waypoints are shown at the bottom of the User sub tab. Stored waypoints are
arranged in alphanumeric order.
To scroll through and review the waypoint list:
1. Use the ROCKER to highlight the Points tab on the Main Menu, and then
highlight the User sub tab.
2. Press up or down on the ROCKER to scroll through the list of waypoints;
press right or left on the ROCKER to scroll by page.
3. Press ENTER to review the highlighted waypoint on the Review Waypoint
Page. See page 16 for information on reviewing and editing waypoints.
4. Press the Next soft key to return to the waypoint list. The next waypoint in
the list is automatically highlighted.
Deleting Waypoints
The following soft keys are available when you highlight a waypoint on the User
sub tab:
• New Waypoint—creates a new waypoint.
• Delete—deletes the selected waypoint from the list and any from route in
which the waypoint was used.
Del by Smbl—deletes waypoints that use the same symbol.
•
• Delete All—deletes all waypoints from the unit.
NOTE: When you delete a waypoint from the list, it cannot be recovered from
the unit. Save important waypoints to a data card, or write them down.
GPSMAP 3206/3210 Owner's Manual
b o
asIc
To delete a single waypoint from the User sub tab:
1. Use the ROCKER to highlight the waypoint you want to delete, and then
press the Delete Waypoint soft key. A confirmation message appears.
2. Press the OK soft key to delete the selected waypoint.
To delete waypoints by symbol:
1. On the User sub tab, highlight the waypoint you want to delete.
2. Press the Delete By Symbol soft key.
3. Use the ROCKER to highlight the symbol of the waypoints you want to
delete, and press ENTER.
4. Press the OK soft key to delete the waypoints by symbol. Otherwise, press
the Cancel soft key to return to the User sub tab without deleting any
waypoints.
To delete all user waypoints:
1. On the User sub tab, press the Delete All soft key.
2. Highlight OK, and press ENTER to delete all user waypoints.
> r e w
PeratIon evIewIng and dItIng aYPoInts
1